PC PC-115P polycarbonate (PC) virgin granules use for medical/nursing supplies

PREV: PC PC-6710 polycarbonate (PC) virgin granules use for home appliance components, lighting fixtures, electrical applications, power tools NEXT:PC 2805 polycarbonate (PC) virgin granules use for industrial parts, automobile parts, electronic and electrical parts, medical products and general supplies

Color	Natural color
Processing mode	Injection molding
Material property	High fluidity, fast processing, gamma ray resistance
Use of materials	Medical/nursing supplies

Physical property	Specific gravity	1.2	g/cm³	ASTM D792, ISO 1183
	Melt rate (melt flow rate) (300°C/ 1.2kg)	15	g/10 min	ASTM D1238
	Melting volume flow rate (MVR) (300°C/ 1.2kg)	15	cm³/10min	ISO 1133
	Shrinkage rate			ASTM D955
	Flow	0.50 - 0.70	%	ASTM D955
	Lateral flow	0.50 - 0.70	%	ASTM D955
	Water absorption (23°C, 24 hr)	0.2	%	ASTM D570
Hardness	Rockwell hardness (M grade)	77		ASTM D785
Hardness	Ball pressure hardness (H 358/30)	101	MPa	ISO 2039-1
Mechanical property	Tensile strength
	Yield, 3.18 mm 1	61.8	MPa	ASTM D638
	Yield	64	MPa	ISO 527-2/50
	Fracture	70	MPa	ISO 527-2/50
	Elongation
	Yield, 3.18 mm 2	6	%	ASTM D638
	Break, 3.18 mm 3	110	%	ASTM D638
	Fracture	120	%	ISO 527-2/50
	Bending modulus
	6.35 mm 4	2350	MPa	ASTM D790
	-- 5	2400	MPa	ISO 178
	Bending strength
	6.35 mm 6	90.2	MPa	ASTM D790
	-- 7	90	MPa	ISO 178
	Compressive strength	76.5	MPa	ASTM D695
Impact property	Notched impact strength of simply supported beams	70	kJ/m²	ISO 179
	Notched impact strength of overhanging beam
	3.18 mm	850	J/m	ASTM D256
	--	75	kJ/m²	ISO 180/1A
Thermal performance	Thermal deformation temperature under load
	0.45MPa, not annealed 8	136	°C	ASTM D648
	1.8 MPa, not annealed 9	125	°C	ASTM D648
	1.8 MPa, not annealed	128	°C	ISO 75-2/A
	1.8 MPa, annealed	143	°C	ISO 75-2/A
	Vica softening temperature
	--	150	°C	ASTM D1525, ISO 306/A50 7 10
	--	145	°C	ISO 306/B50
	Linear coefficient of thermal expansion - Flow (44 to 100°C)	6.0E-5 - 8.0E-5	cm/cm/°C	ASTM D696
	Thermal conductivity	0.2	W/m/K	ASTM C177
Electrical performance	Volume resistivity	3.00E+16	ohms·cm	ASTM D257
	Dielectric strength (1.60mm)	30	kV/mm	ASTM D149
	Dielectric constant			ASTM D150
	60 Hz	2.95		ASTM D150
	1 MHz	2.9		ASTM D150
	Dissipation factor			ASTM D150
	60 Hz	4.00E-04		ASTM D150
	1 MHz	9.00E-03		ASTM D150
	Arc resistance 11	110	sec	ASTM D495
Flammability	UL flame retardant rating			UL 94
	0.400 mm	V-2		UL 94
	1.50 mm	V-2		UL 94
	2.50 mm	V-2		UL 94
Optical property	Refractive index	1.585		ASTM D542
	Transmittance (76200 µm)	89	%	ASTM D1003
	Fog degree (81300 µm)	< 0.80	%	ASTM D1003
Injection	Drying temperature	120	°C
	Drying time	4	hr
	Temperature at the back of the barrel	230 - 300	°C
	Temperature in the middle of the barrel	250 - 310	°C
	Temperature at the front of the barrel	250 - 300	°C
	Mold temperature	70.0 - 120	°C

PC PC-115P polycarbonate (PC) virgin granules can be used in the production of various medical and nursing supplies due to their excellent physical and chemical properties:

Infusion and transfusion devices: PC is commonly used to manufacture components of intravenous (IV) sets, such as drip chambers, connectors, and tubing, due to its clarity and resistance to cracking.

Medical instruments and devices: PC can be used to make various medical instruments and devices, such as blood oxygenators, surgical instruments, and respiratory therapy equipment.

Diagnostic equipment: Polycarbonate is used to make components of diagnostic equipment, such as sample holders and reaction vessels, due to its transparency and chemical resistance.

Medical imaging: Polycarbonate is used in medical imaging applications, such as X-ray and CT scanner components, due to its high-temperature resistance and X-ray transparency.

Zhejiang Houmi Import and Export Corporation

Zhejiang Houmi Import and Export Corporation was established in 2020 with a registered capital of 10 million yuan.

Relying on the company's more than 10 years of domestic trade and import experience, the establishment of HOUMI entrances and exports specifically targeted at the export business of plastic raw materials. The company's main business: PP PE PVC ABS PC POM PMMA PETG PS. Development brands: Sinopec, PetroChina, Shenhua, Secco, Sabic, Borouge, Yondellbasell, Qatar Petrochemical, sumitomo, Mitsubishi, Lottle, LG, Formosa Plastics, Chimei, etc. Suppliers of PC PC-115P polycarbonate (PC) virgin granules use for medical/nursing supplies in China. Our company adheres to the purpose of collaboration, innovation, reflects value, and win -win corporate tenets, and cooperates with employees to cooperate with partners to win a win -win situation with partners.